Diversity receive capability
If you have two antennas, diversity receive* capability is useful for
mobile operation where the received signal strength changescontinuously.
Within a single band, the radio compares signal strength from
eachantenna and chooses the better signal to maintain good sound and
receive quality.
* Available on 127, 136, 146, 375, 440, 500MHz bands in FM, FM-N, DV mode only.
50W output power on both VHF and UHF bands
Dual antenna meterA MOSFET power amplifier provides a powerful 50Won
both the 2m and 70cm bands, making this compact rig' s signal travel for
miles! Output power is selectable in 3 steps.
User-friendly operation
The large 93 × 28 mm ( 321/ 32 × 13/ 32in) full dot matrix display
presents an easy-to-read graphical interface, viewableover a wide angle.
Push the " Function " button to call up the assignedfunctions menu on
the display. In addition, tuning knobs and buttons for each bandare
arranged side-by-side, providing intuitive operation.
Separate controller from main unit
Symmetric layout and easy-to-read graphical interfaceThe controller is
separated from the main unit for flexible installation. The
controllerhas magnets on the rear panel, allowing you to attach the
controller to the mainunit or other metal objects. This makes clean and
neat installation easy! A 3.4mseparation cable, OPC-1663, and a short
cable ( 10cm) , OPC-1712, are included.
522 memory channels
The IC-2820H has a total of 522 memory channels, 500 regular channels, 2
call channelsand 20 scan edge channels. Each memory channel stores tone
frequency, skip informationand so on. The Dynamic Memory Scan ( DMS)
system divides these memories into 26 groups, A to Z, and provides easy
channel selection. Of course, bank scanning is also possible.
Band scope function
The band scope function lets you watch conditions near the receiving frequency andvisually assists in finding other stations.
Other features
• ± 2.5ppm high frequency stability with TCXO unit
• Green to amber variable display background color
• 104 × 2 DTCS/ 50 CTCSS tone squelch operation
• Max. 45 channel/ sec. high speed scan capability in programmed scanning mode
• 9600bps packet terminal, mini DIN ( 6-pin) connector
• Long or short squelch delay
• Automatic attenuator
• FM narrow capability
• Sub-band auto mute function
• 16 DTMF memory channels ( 24 digits)
• DTMF pager and code squelch function
• Auto power off
• Auto repeater function ( USA version only)
• DTMF remote control function ( USA version only)
• Weather channel with weather alert function ( USA and EXP versions only)
D-STAR DV mode + GPS receiver
The optional UT-123 provides D-STAR DV mode operation plus GPS receiver
capability.Your location information can be sent simultaneously with
the digital voice transmission.
Location information exchange
The IC-2820H sends your location information either when the mic PTT
switch is pushed, or at a preset interval ( 5 seconds - 30 minutes) .
When available from a callingstation, the IC-2820H displays the distance
and direction to the station.
GPS alarm
The GPS alarm alerts you by beeping when a preprogrammed point is
within 500m or1km range from your location or anyone of preprogrammed
points is within a presetsquare range.
GPS location tracking
When connected to a PC* via the optional RS-232Ccable, OPC-1529R, your
own or the received location information can be plotted bymap software*
on a PC.
* Serial port and map software ( NMEA 0183) are required.
One touch reply function
The one-touch reply function makes it easy to respond to a calling
station instantly.In addition, up to 20 received callsigns are
automatically stored as received callrecords.
Built-in voice recorder and auto reply function
The built-in voice recorder* records an incomingcall for up to
30-seconds ( approx.) , ( or 15 sec. × 2 tracks, 10 sec. × 3 tracks) .
The 10 sec. transmit memory allows you to record your callsign or
othermessage, and also automatically answers when you receive a message.
* Available in DV mode only
Low-speed data communication
When connected to a PC* via the optional datacable,
OPC-1529R, the data communication is available simultaneously with a digital voicetransmission.
* Serial port and serial communication software are required.
DX communication over the D-STAR system
D-STAR repeaters for 144 and 440MHz are now available, allowing
cross-band ( 144/ 440/ 1200MHz) operation and long distance
communication via the Internet over the D-STARsystem..
Info dan harga terbaik hubungi :
Raja Survey Grup
JL Pesantren no.64 Jurang Mangu Timur
Pondok Aren
Tangerang Selatan 15222
Tidak ada komentar:
Posting Komentar