Professional communications receiver with high performance spectrum scope
Wideband coverage
The IC-R9500 covers 0.005– 3335MHz* 1 in SSB, AM, FM, WFM, CW, FSK and
P25* 2 modes. It is suitable for a wide variety of radio monitoring and
listening activities.
* 1 Frequency range differs depending on version.
* 2 Optional UT-122 digital unit is required.
Superb receiver performance
15MHzThe IC-R9500 achieves its amazing performance by using a D-MOS FET
array in the 1st mixer ( below 30MHz) and an excellent IMD roofing
filter. The IC-R9500 has + 40dBm IP3 and 109dB dynamic range at 14.1MHz.
IP3 performance is + 9.8dBm at 50MHz and + 6.2dBm at 620MHz ( + 5dBm (
typical) from 30MHz to 3335MHz) .
Five roofing filters
Five roofing filtersThe IC-R9500 has 5 independent roofing filters (
240, 50, 15, 6 and 3kHz) for improved selectivity. In very crowded RF
spectrum conditions, it is extremely important to prevent overload and
from strong signals. The 3kHz roofing filter provides a 130dB ( approx.)
* blocking dynamic range.
* At 15MHz reception, with 5kHz separation signals.
± 0.05ppm high frequency stability
OCXO unitThe IC-R9500 uses an OCXO ( Oven Control Crystal Oscillator)
unit which provides ± 0.05ppm frequency stability from 0° C to 50° C.
The 10MHz reference frequency can either be supplied to or input from
external equipment.
Multi function spectrum scope
Center mode setting example & Fix mode setting exampleUsing a
dedicated DSP unit improves the dynamic range of the spectrum scope. The
IC-R9500 has four different display modes such as normal/ wide and
center/ fixed width. The spectrum scope normally covers a range from ±
2.5kHz to ± 5MHz, while the wide band spectrum scope* observes up to ±
500MHz ( ± 10MHz, ± 25MHz, ± 50MHz, ± 100MHz ± 250MHz and ± 500MHz
selectable) . When using the normal spectrum scope mode, the digital
scope’ s filter width can vary from 200Hz to 20kHz with a variable sweep
speed.
The peak search function automatically moves the display marker to the
strongest signal on the scope screen. In addition to these features, the
scope has 3 levels of attenuation ( 10dB, 20dB, 30dB) .
* While using the wide band scope function, AF output is muted.
7-inch wide color TFT LCD
The large 7-inch wide ( 800 × 480 pixels) active matrix display
delivers quick response time, high resolution and has a wide viewing
angle. The multi-function spectrum scope is displayed in vivid color.
The background color is selectable from black or blue for your
preference. In addition, the IC-R9500 has a VGA connector allowing you
to connect an external monitor.
Multiple RSSI
S-meter, dB¼ , dB¼ ( emf) and dBm meter types are selectable in the
IC-R9500. The dB¼ , dB¼ ( emf) and dBm meter have ± 3dB of accuracy* .
( * 10 to 70dB¼ signal from 100kHz to 3335MHz at 25° C)
Digital voice recorder
The IC-R9500 has two types of digital voice recorders. One is the
regular recorder, recording for long periods in “ WAV” format to the
built-in CF memory or an external USB memory. The sampling rate is
variable from 8kHz ( SQ1) to 48kHz ( SHQ) . In SQ1 mode, up to 130
minutes ( approx.) of recorded audio can be stored into the CF memory.
The other recorder is the short voice recorder that saves the previous
15 seconds of radio audio into RAM, allowing you to play back the audio
instantly.
Dual DSP
The IC-R9500 incorporates two independent, 32-bit floating point DSP
units, a dedicated DSP unit for receiver functions and another for the
spectrum scope. By using the power of two independent DSP units, the
radio can respond to operator changes in an instant.
Other feature
• Digital IF filter
• Digital twin PBT
• Noise blanker
• Noise reduction
• Notch filter
• Synchronous AM detection
• FSK demodulator and decoder
• 10 VFOs
• 1220 memory channels
• Multiple-scan functions
• Voice synthesizer
• USB connector
• SSB/ CW/ AM mode auto tuning function
• AFC function compensates for frequency shifts ( FM/ WFM mode only)
• CW-R ( reverse) mode
• Preamp and attenuator
• 1/ 4 tuning step function and dial click function
• APF ( Audio Peak Filter)
• AGC ( Automatic Gain Control)
• VSC ( Voice Squelch Control)
• Input overload protection ( HF bands only)
• Optional P25 digital mode reception
• Optional CI-V interface and RS-232C for PC remote control
• Analog TV tuner ( NTSC/ PAL/ SECAM) * 1
• 4 antenna connectors: an SO-239 type, a phono ( RCA) connector and two type-N connectors
• S/ P DIF output jack
• Video input/ output
• Clock function with daily timer and sleep timer
• CTCSS and DTCS tone squelch
• Simplified frequency calibration using WWV or WWVH
Info dan harga terbaik hubungi :
Raja Survey Grup
JL Pesantren no.64 Jurang Mangu Timur
Pondok Aren
Tangerang Selatan 15222
Tidak ada komentar:
Posting Komentar